Equipments
BIO-PRO 18 pairs Temporary Immersion System using Bioreactors (Bit-RALM or PET Bottles)
Programming:
• Control panel for air system control via PLC (programmable logic control)
• Programming in minutes and seconds
• Pause time between processes
• Programming by time (seconds) for CO2 enrichment or gas exchange (Note: Does not include CO2 supply)
• Conventional LED lighting
• Real-time clock (RTC) - power outages do not affect programming
• LED lighting for inspection
​
Equipment components:
• 1 ultra-quiet compressor with 60 psi capacity, moisture filter, and pressure regulator
• Quick-connect fittings
• Silicone and polyurethane hoses
• 72 PTFE membrane filters 33/022 with silicone hose adapters
• 18 3-liter culture medium tanks
• 1 PLC control panel
• 18 temporary immersion bioreactors with 5.5-liter capacity BIT-RALM)
• 1 White epoxy wired steel rack, 1550 mm long, 457 mm deep, and 2000 mm high
• 3 Conventional LED inspection lights
• System works with the Bit-RALM bioreactor, PET bottles, or both simultaneously.
Advantages:
• Excellent cost-benefit
• Extremely low energy consumption
• Easy to program
Clique para ampliar
Clique para ampliar
Clique para ampliar
Clique para ampliar
BIO-PRO 6 pairs Temporary Immersion System using Bioreactors
Programming:
• Control panel for controlling the air system via PLC (programmable logic control)
• Programming in minutes and seconds
• Pause time between processes
• Programming by time (seconds) for CO2 enrichment or gas exchange (Note: Does not include CO2 supply)
• Lighting using conventional LEDs
• Real-time clock (RTC) - power outages do not affect programming
• LED lighting for inspection
​
Equipment components:
• 1 ultra-quiet compressor with a 60 psi capacity with a moisture filter and pressure regulator
• Quick-connect fittings
• Silicone and polyurethane hoses
• 24 PTFE membrane filters 33/022 with silicone hose adapters
• 6 3-liter culture medium tanks
• 1 PLC control panel
• 6 temporary immersion bioreactors with a capacity of 5.5 liters (BIT-RALM)
• 1 white epoxy wired steel rack, 1550 mm long, 457 mm deep, and 2000 mm high
• 2 conventional LED inspection lamps
​
Advantages:
• Excellent value
• Extremely low energy consumption
• Easy to program
Shelf for Growth Room
Description:
• Full-length grooved steel tubular posts
• Wired steel trays/shelves with reinforcement on all four sides
• 6 trays with adjustable spacing
• 180 kg load capacity per tray/shelf
• Assembly using fittings
• White epoxy paint finish
• Adjustable feet
​
Dimensions:
• 1520 mm long x 610 mm deep x 2000 mm high
• Lighting with 10 white LED lamps, two per shelf
• Timer for lighting control with 40 programs in memory
• General on/off button
• Lighting, individualized per shelf (energy savings)
• Average measurement: 1500 Lux per shelf
• Capacity for approximately 850 bottles with 70 mm diameter • Fully recessed wiring in compliance with safety standards
Clique para ampliar
Laboratory cart
3 shelves Ref. CAR-03
4 shelves Ref. CAR-04
Features:
• White epoxy steel
• With 3, 4, or 5 shelves
• Casters • Brakes on 2 wheels
​
Dimensions:
• Length 762 mm x width 457 mm x height 900 mm (other measurements available upon request)
• Height-adjustable shelves
​
Advantages:
• Extremely durable
• Easy shelf height adjustment
• Casters with brakes
Clique para ampliar
Clique para ampliar
Clique para ampliar
Clique para ampliar
Ultra-quiet mini compressor
Ref. COP-2011
Features:
• POWER: 1/6HP
• AIR PRODUCTION: 20-30 L/MIN
• MAXIMUM WORKING PRESSURE: 60 PSI
• SHUTDOWN AT 60 PSI 4.3 BAR
• RESUME AT 40 PSI 2.8 BAR
• DIMENSIONS: 24.5 X 13.5 X 17CM
• VOLTAGE: 110V/220V (BIVOLT)
• WEIGHT: 3.6KG ​
​
Advantages:
• Extremely quiet
• Excellent air flow
• 1/6 HP oil-free motor
• Robust body
• Filter draining is done manually by simply pressing a small valve for a few seconds.
• Capacity to hold 6 pairs of 5.5-liter bioreactors
• Air filter with built-in pressure regulator
​
Precautions:
• This equipment must be stored in a clean, dry place.
• Do not expose it to high temperatures when in use.
• Be careful when handling the equipment for extended periods of time, as it produces a lot of heat. (The ideal time for use is 20 minutes at a time.)
• Drain the filter regularly.
• If you experience any problems with the equipment, please contact our technical department.