top of page

Consumable Itens

Flag_of_Spain.svg.png
bandeira-do-brasil-vetor-traducao-da-bandeira-do-brasil-do-texto-em-portugues-ordem-e-prog

Scan the QR Code and download our online catalog.

 Products with certified raw materials tested with the highest levels of reliability and improved results.

Snap-on Bio lid

Ref. TC-004-2020
Characteristics:

• Body made of autoclavable random polypropylene

• Completely unbreakable

• Autoclavable

• Excellent transparency

​

Dimensions:

• External diameter: 67.5 mm

• External height: 22 mm

• Internal diameter: 59 mm

​

Advantages:

• Produced from environmentally friendly material that is easy to reprocess.

• High impact resistance.

• High tolerance to sequences of autoclaving

• Excellent transparency.

​

Cautions:

• Wash with a soft sponge and neutral soap

• Do not autoclave outside standard conditions.

Temporary Immersion Bioreactor
Ref. BIO-001-2010

Description:

• Made of polycarbonate

• Mouth diameter – 220 millimeters

• Total diameter with lid and locks, 240 millimeters

• Height without the lid, 205 millimeters

• Height with the lid, 225 millimeters

• Total capacity: 5.5 liters

• Total assembled weight, approximately 950 g.

• 8 translucent locks in polycarbonate for use on the shelf

• 8 amber locks for use during autoclaving

•Stainless steel mesh 0.16 wire mesh 60, framed and with a central handle in polycarbonate. (Other meshes and wires available on request)

• Non-toxic silicone ring in the lid seal

• Internal diffusers for CO2 dispersion

• Fully autoclavable

​​

Advantages:

• Prevents accidents as it is unbreakable

• Uniformity in the walls optimizing transparency

• Supports successive autoclaving

• 70% lighter than glass, facilitating transport and reducing operator muscle fatigue

• Hook to secure the culture medium reservoir, making transport easier

​

Cautions:

• Wash with a soft sponge and neutral soap

• Do not use sulfochromic solution

• Do not autoclave outside standard conditions.

Filter PTFE 
Ref. FSN-33/022REF

Characteristics:

• Filter Material: Polypropylene

• Membrane Material: PTFE – Polytetrafluoroethylene (Other membranes available upon request)

• Fully autoclavable

• Porosity 0.22 µm (other porosities available upon request)

• External diameter of the filter: 40 mm

• Diameter of the filtering membrane: 33 mm

• Filtration area: 8.5 cm²

• Maximum pressure: 75 psi (5.2 bar)

• Maximum volume: 0.35 ml

• Non-sterile

• Adapters for use with silicone tubing

• Bidirectional flow

​

Main Advantages:

• Low cost with excellent durability and ease of handling compared to currently used filters

• Adapters for use with silicone and polyurethane hoses, preventing the frequent cutting of hose ends, facilitating filter replacement.

• More than one filter can be connected without the need for joints.

Polycarbonate flask for Micropropagation 250 ml
Ref. FC 001-2011

Features:

• Body made of autoclavable polycarbonate

• Lid made of random polypropylene

• Completely unbreakable

• Excellent transparency

​

Dimensions:

• Capacity 250 ml

• Height of the flask without lid: 80 mm

• Height of the flask with lid: 83 mm

• Diameter of the flask at the mouth: 70 mm

• Diameter of the lid: 77 mm

• Height of the lid: 21 mm

​​

Advantages:

• Ring on the lid and bottom of the flask for easy stacking • Prevents accidents as it is unbreakable

• Uniformity in the walls optimizing transparency

• Supports successive autoclaving

• 70% lighter than glass, facilitating transport and reducing operator muscle fatigue.

​

Cautions:

• Wash with a soft sponge and neutral soap

• Do not use sulfochromic solution

• Do not autoclave outside standard conditions.

Polycarbonate flask for Micropropagation 380ml

Ref. FC 005-2011

Features:

• Autoclavable polycarbonate body

• Random polypropylene lid

• Completely unbreakable

• Excellent transparency ​​

 

Dimensions:

• Capacity: 380 ml

• Height of flask without lid: 125 mm

• Height of flask with lid: 128 mm

• Diameter of flask at the mouth: 70 mm

• Diameter of lid: 77 mm

• Height of lid: 21 mm

​

Advantages:

• O-ring on the lid and bottom of the flask for easy stacking

• Prevents accidents because it is unbreakable

• Uniformity on the walls, optimizing transparency

• Withstands repeated autoclaving

• 70% lighter than glass, making it easier to transport and reducing operator muscle fatigue.

 

Cautions:

• Wash with a soft sponge and mild soap

• Do not use sulfochromic solution

• Do not autoclave outside standard conditions.

Double Rack for Test Tubes up to 100 mm in Height

​Ref. 003-2011

Features:

• Autoclavable polycarbonate body

• Completely unbreakable

• Autoclavable

• Capacity for 32 tubes

• Stackable

​

Dimensions:

• Capacity for 32 tubes up to 27 mm in diameter with a maximum height of 100 mm

• Height: 33 mm

• Length: 280 mm

• Width: 145 mm

 

Advantages:

• Prevents accidents because it is unbreakable

• Can be autoclaved with test tubes

• Withstands repeated autoclaving

• 80% lighter than metal, making it easier to transport and reducing operator muscle fatigue.

​

Cautions:

• Wash with a soft sponge and mild soap

• Do not use a sulfochromic solution

• Do not autoclave outside standard conditions.

Triple Rack for Test Tubes above to 100 mm in Height
Ref. 004-2011

Features:

• Autoclavable polycarbonate body

• Completely unbreakable

• Autoclavable

• Capacity for 32 tubes

• Stackable

​

Dimensions:

• Capacity for 32 tubes up to 27 mm in diameter with a maximum height of 100 mm

• Height: 57 mm

• Length: 280 mm

• Width: 145 mm

​

Advantages:

• Prevents accidents because it is unbreakable

• Can be autoclaved with test tubes

• Withstands repeated autoclaving

• 80% lighter than metal, making it easier to transport and reducing operator muscle fatigue.

​

Cautions:

• Wash with a soft sponge and mild soap

• Do not use a sulfochromic solution

• Do not autoclave outside standard conditions.

Polycarbonate Test Tube 35ml

Ref. FC 002-2011

Features:

• Autoclavable polycarbonate body

• Random polypropylene lid

• Flat outer bottom for better support

• Rounded inner bottom for better cleaning

• Completely unbreakable

• Excellent transparency

​

Dimensions:

• Capacity: 35 ml

• Tube height without lid: 86 mm

• Tube height with lid: 88 mm

• Lid diameter: 28 mm

 

Advantages:

• Prevents accidents because it is unbreakable

• Uniformity on the walls, optimizing transparency

• Withstands repeated autoclaving

• 70% lighter than glass, facilitating transport and reducing operator muscle fatigue.

 

Cautions:

• Wash with a soft sponge and mild soap

• Do not use sulfochromic solution

• Do not autoclave outside standard conditions.

Polycarbonate Test Tube 45ml

Ref. FC 006-2011

Features:

• Autoclavable polycarbonate body

• Random polypropylene lid

• Flat outer bottom for better grip

• Rounded inner bottom for better cleaning

• Completely unbreakable

Excellent transparency

​

Dimensions:

• 45ml capacity

• Tube diameter at the mouth: 26 mm

• Tube height without lid: 123 mm

• Tube height with lid: 125 mm

• Lid diameter: 28 mm

 

Advantages:

• Avoids accidents because it is unbreakable

• Uniformity on the walls, optimizing transparency

• Supports successive autoclaving

• 70% lighter than glass, facilitating transport and preventing operator muscle fatigue.

​

Cautions:

• Wash with a soft sponge and mild soap

• Do not use sulfochromic solution

• Do not autoclave outside standard conditions.

Culture Medium Reservoir

Ref. RES-BIT-2013

Features:

• For use with bioreactors

• Polypropylene body

• Random polypropylene screw-on lid

• Non-toxic silicone lid sealing ring

• Non-toxic silicone internal drain hose

• 2.8-liter capacity

• Fully autoclavable

• Height without lid: 210 mm

• Height with lid: 230 mm

• Reservoir diameter: 140 mm

• Mouth diameter: 65 mm

• Mouth clearance: 50 mm

• Lid outer diameter: 80 mm

• Lid height: 30 mm Advantages:

• Low cost with excellent durability and ease of use

• 70% lighter than glass, facilitating transport and reducing operator fatigue.

• Withstands repeated autoclaving

 

Cautions:

• Wash with a soft sponge and mild soap

• Do not autoclave outside standard conditions.

Stainless net for BIT-RALM, use with Embryos Ref. T-ES-2014

Description:

• Keeps embryos inside the screen, preventing them from passing to the bottom.

• Made of translucent polycarbonate

• Total diameter: 185 mm

• Side height: 70 mm

• Internal drain tube height: 130 mm

• 316L stainless steel screen – 0.16 wire, 60 mesh

• Fully autoclavable

• Central handle for removing the screen

​

Note: Optional item for BIT-RALM

​

Caution:

• Do not autoclave outside standard conditions.

Silicone Hose 8mm

Ref. MGS-08/04

Features:

• 8 mm outer diameter

• 4 mm inner diameter

• Highly clavable

• Made of non-toxic silicone

• Ideal for use with BIT-RALM

• Ideal for use with RALM PTFE filters

​

Silicone Hose 10mm

Ref. MGS-10/06

Features:

• 10 mm outer diameter

• 6 mm inner diameter

• Highly clavable

• Made of non-toxic silicone

• Ideal for use with BIT-RALM

• Ideal for use with RALM PTFE filters

​

Caution:

• Do not autoclave outside standard conditions.

Polyurethane Hose 8mm

Ref. MGP-08/05

Features:

• 8 mm outer diameter

• 5 mm inner diameter

• Highly clavable

Made of polyurethane in colors (translucent blue, black, red, and yellow)

• Ideal for use with BIO-PRO systems manufactured by RALM

​

Polyurethane Hose 10mm

Ref. MGP-10/07

Features:

• 10 mm outer diameter

• 7 mm inner diameter

• Autoclavable

• Made of non-toxic silicone

 

Caution:

• Do not autoclave outside standard conditions.

Polycarbonate Flask for Micropropagation 1L

Ref. FC 006-2016

Features:

• Autoclavable polycarbonate body

• Random polypropylene lid

• Completely unbreakable

• Excellent transparency ​

​

Dimensions:

• 1L capacity

• Height of flask without lid: 122.3 mm

• Height of flask with lid: 125 mm

• Diameter of flask at the mouth: 115 mm

• Lid diameter: 121.6 mm

• Lid height: 26.2 mm

​

Advantages:

• Prevents accidents because it is unbreakable

• Uniform walls, optimizing transparency

• Withstands repeated autoclaving

• 70% lighter than glass, facilitating transport and reducing operator muscle fatigue.

​

Cautions:

• Wash with a soft sponge and mild soap

• Do not use sulfochromic solution

• Do not autoclave outside standard conditions.

Kimble type lid for 25 mm tubes

Ref. TK 25-2017

Features:

• Autoclavable random polypropylene body

• Completely unbreakable

• Autoclavable

• Excellent transparency ​

​

Dimensions:

• External diameter: 28 mm

• External height: 31.8 mm

• Internal diameter: 28 mm ​

​

Advantages:

• Made of environmentally friendly material that is easy to reprocess.

• Highly impact resistant.

• High tolerance to repeated autoclaving.

• Excellent transparency.

​

Cautions:

• Wash with a soft sponge and mild soap.

• Do not autoclave outside standard conditions.

Large snap-on Bio lid

Ref. TC-004-2020

Features:

• Autoclavable random polypropylene body

• Completely unbreakable

• Autoclavable

• Excellent transparency ​ Dimensions:

• External diameter: 67.5 mm

• External height: 22 mm

• Internal diameter: 59 mm ​

​

Advantages:

• Made of environmentally friendly material that is easy to reprocess.

• Highly impact resistant.

• High tolerance to autoclaving sequences.

• Excellent transparency.

​

Cautions:

• Wash with a soft sponge and mild soap.

• Do not autoclave outside the standard conditions.

Polycarbonate Petri Dish

Ref. PP-001-2016​

Features:

• Autoclavable random polypropylene body

• Autoclavable random polypropylene lid

• Completely unbreakable

• Excellent transparency ​

​

Dimensions:

• Lid diameter: 91 mm

• Body diameter: 88 mm

• Lid height: 8.5 mm

• Body height: 12 mm

• Total height: 14 mm

​

Advantages:

• Made of environmentally friendly material that is easy to reprocess.

• Highly impact resistant.

• High tolerance to repeated autoclaving.

• Excellent transparency.

​

Cautions:

• Wash with a soft sponge and mild soap.

• Do not autoclave outside the standard conditions.

Polycarbonate Flask for Micropropagation 700ml

Ref. FC 007-2021

Features:

• Autoclavable polycarbonate body

• Random polypropylene lid

• Completely unbreakable

• Excellent transparency ​

​

Dimensions:

• Capacity: 700 ml

• Height of flask without lid: 90 mm

• Height of flask with lid: 94 mm

• Diameter of flask at the mouth: 107 mm

• Diameter of lid: 112 mm • Height of lid: 23 mm Advantages:

• O-ring on the lid and bottom of the bottle for easy stacking

• Prevents accidents because it is unbreakable

• Uniformity on the walls, optimizing transparency

• Withstands repeated autoclaving

• 70% lighter than glass, facilitating transport and reducing operator muscle fatigue.

​

Cautions:

• Wash with a soft sponge and mild soap

• Do not use sulfochromic solution

• Do not autoclave outside the standard conditions.

​

Podemos ajudar você? Contate a nossa equipe +55 11 4337-7505 / +55 11 98960-2322 (WhatsApp)

RALM produtos para laboratórios e biofabricas

bottom of page